Serviceautosrepair.com - Have you ever had a car engine suddenly issued a scream squealing noise when you use AC or turn on the lights at night, or even when the machine is turned on / start up and when the wheel turns. sound of squealing noise is a loud scream and can make you shocked. and the sound comes from the front of your car engine. If not too severe, squealing sound does not last long and if it is severe, it can also be long. at what time the symptoms sound like this could happen, if in the tropics, usually a lot happens if after the rainy season. what exactly is the source of the sound, it is the sound of the fan belt / belt is loose, or already hard could even be worn.
Do not let it last long without repair, because it can cause a bad influence. anything that can be generated from this condition, which is the first component is rotated melelui fan belt will not work optimally. For example if the alternator fan belt is integrated with the battery charging will terganngu, if the cooling fan, it will be less than the maximum cooling systems. and of course also the fan belt can be hot and could result in the fan belt broke. so if there is the sound of squealing noise scream immediately check the fan belt and other belt.
How do you to fix this condition, well here's how.
Do not let it last long without repair, because it can cause a bad influence. anything that can be generated from this condition, which is the first component is rotated melelui fan belt will not work optimally. For example if the alternator fan belt is integrated with the battery charging will terganngu, if the cooling fan, it will be less than the maximum cooling systems. and of course also the fan belt can be hot and could result in the fan belt broke. so if there is the sound of squealing noise scream immediately check the fan belt and other belt.
How do you to fix this condition, well here's how.
How to Fix Engine Squeal on Start Up, Steering Wheel Turn and A/C is on
To repair the sound of screams in the engine caused by a loose belt, you could certainly do a reset. in each set of belts are suit for estrangement. generally to belt alternator dynamo done by shifting the dynamo. and there is also the use of additional pulleys function to suit estrangement. if using a pulley setter then usually first loosen the bolt or nut pulley and then turn the adjusting screw until estrangement suggested. to adjust the belt should not be too tight or too loose.
In some cases it can happen vanbelt still screaming despite already tight. This can be caused by van belt which is already hard. the solution you need to replace them with new ones. or if you have not had time, and only wants to eliminate its sound can be spread just a little Grease. Remember just a bit to let the wet.
Hopefully useful and thank you for your visit.
0 komentar:
Post a Comment
Write a comment here